Rover 111 diesel reliability

First registered 1993–1998 · 197 MOT tests · all Rover 111 models

Less reliable than average

The Rover 111 diesel fails its MOT 33% more often than comparable cars.

95% range: 16–50% more often. Compared with comparable cars of the same age, mileage and year of first registration, on 197 first MOT tests of vehicles first registered 1993–1998.

Relative fail rate 1.33 (95% range 1.16–1.50); 1.00 = same as comparable vehicles

fails less oftenmore often

46%
pass their MOT first time (38.9%–52.7%)
57
vehicles MOT-tested, 0 still on the road
6,500 miles
typical miles a year
11%
reached 100,000 miles

MOT pass rate by age

Share of first MOT tests each year (not retests) that passed with no failure items.

Not enough tests at different ages to draw this chart.

Buying a high-mileage Rover 111 diesel

Too few MOT tests at 100,000+ miles for a high-mileage verdict.

First-time MOT pass rate at each mileage. The dashed line is what comparable cars with the same mileage, age and year of first registration achieve, so the gap between the lines is down to the model, not to how old or well used the cars are.

Not enough tests across mileage bands to draw this chart.

What fails

Share of first MOT tests with at least one failure item in each area; 9.1% had a dangerous defect. “vs comparable cars” compares with comparable cars of the same age, mileage and year of first registration.

AreaMOTs failed on itvs comparable cars
Corrosion & structure +459%
Brakes +43%
Lights & electrics +16%
Suspension +100%
Seat belts & airbags +358%
Tyres & wheels +45%
Exhaust & emissions +38%
Windscreen & mirrors -23%
Steering +45%
Fuel system +125%
Drive shafts & transmission -76%
Registration plate & VIN -30%
Body & doors +24%

Most common MOT failures

  1. 1Parking brake: efficiency below requirements · Brakes9.3% of MOTs
  2. 2Seat belt anchorage prescribed area is excessively corroded · Seat belts & airbags9.1% of MOTs
  3. 3Exhaust has a major leak of exhaust gases · Exhaust & emissions7.9% of MOTs
  4. 4Tyre tread depth below requirements of 1.6mm · Tyres & wheels7.8% of MOTs
  5. 5Subframe mounting prescribed area is excessively corroded · Corrosion & structure7.3% of MOTs
  6. 6Fog lamp not working · Lights & electrics6.7% of MOTs
  7. 7Brake pipe excessively corroded · Brakes5.8% of MOTs
  8. 8Service brake: efficiency below requirements · Brakes5.7% of MOTs
  9. 9Suspension component mounting prescribed area is excessively corroded · Corrosion & structure4.8% of MOTs
  10. 10Exhaust emissions carbon monoxide content after 2nd fast idle excessive · Exhaust & emissions4.2% of MOTs