Peugeot 408 hybrid reliability

First registered 2023–2025 · 290 MOT tests · all Peugeot 408 models

Not enough evidence for a verdict

The Peugeot 408 hybrid fails its MOT 24% less often than comparable cars, but the evidence is not clear-cut.

95% range: between 48% less and 9% more often. Compared with comparable cars of the same age, mileage and year of first registration, on 290 first MOT tests of vehicles first registered 2023–2025.

Relative fail rate 0.76 (95% range 0.52–1.09); 1.00 = same as comparable vehicles

fails less oftenmore often

91%
pass their MOT first time (87.6%–94.1%)
254
vehicles MOT-tested, 254 still on the road
8,500 miles
typical miles a year
1%
reached 100,000 miles and 0% reached 150,000

MOT pass rate by age

Share of first MOT tests each year (not retests) that passed with no failure items.

Not enough tests at different ages to draw this chart.

Buying a high-mileage Peugeot 408 hybrid

Too few MOT tests at 100,000+ miles for a high-mileage verdict.

First-time MOT pass rate at each mileage. The dashed line is what comparable cars with the same mileage, age and year of first registration achieve, so the gap between the lines is down to the model, not to how old or well used the cars are.

Not enough tests across mileage bands to draw this chart.

What fails

Share of first MOT tests with at least one failure item in each area; 5.2% had a dangerous defect. “vs comparable cars” compares with comparable cars of the same age, mileage and year of first registration.

AreaMOTs failed on itvs comparable cars
Tyres & wheels about the same
Lights & electrics -52%
Brakes -14%
Windscreen & mirrors -57%
Seat belts & airbags -27%
Steering +255%

Most common MOT failures

  1. 1Tyre has a cut in excess of the requirements deep enough to reach the ply or cords · Tyres & wheels1.8% of MOTs
  2. 2Tyre tread depth below requirements of 1.6mm · Tyres & wheels1.3% of MOTs
  3. 3Brake pad less than 1.5 mm thick · Brakes0.5% of MOTs
  4. 4Headlamp aim too high · Lights & electrics0.5% of MOTs
  5. 5Tyre has a bulge, caused by separation or partial failure of its structure · Tyres & wheels0.5% of MOTs
  6. 6Windscreen washer provides insufficient washer liquid · Windscreen & mirrors0.5% of MOTs
  7. 7Brake disc significantly and obviously worn · Brakes0.4% of MOTs
  8. 8Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt · Drive shafts & transmission0.3% of MOTs
  9. 9Service brake excessively fluctuating · Brakes0.3% of MOTs
  10. 10Engine mil inoperative or indicates a malfunction · Exhaust & emissions0.2% of MOTs