Royal Alloy GT 200 reliability
First registered 2018–2022 · 594 MOT tests
The Royal Alloy GT 200 fails its MOT 5% more often than comparable cars, but the evidence is not clear-cut.
95% range: between 15% less and 30% more often. Compared with comparable cars of the same age, mileage and year of first registration, on 594 first MOT tests of vehicles first registered 2018–2022.
fails less oftenmore often
MOT pass rate by age
Share of first MOT tests each year (not retests) that passed with no failure items.
The dashed line is all cars of the same age, whatever their mileage. The verdict above also matches mileage and year of first registration, so the two can differ; pass rate by mileage compares like with like.
Show as a table: pass rate by age
| Age | Pass first time | 95% range | All cars of the same age | Tests |
|---|---|---|---|---|
| 3 | 89.9% | 83.8%–93.9% | 86.2% | 139 |
| 4 | 83.7% | 76.4%–89.1% | 83.7% | 129 |
| 5 | 93.9% | 88.0%–97.0% | 80.1% | 115 |
Buying a high-mileage Royal Alloy GT 200
Too few MOT tests at 100,000+ miles for a high-mileage verdict.
First-time MOT pass rate at each mileage. The dashed line is what comparable cars with the same mileage, age and year of first registration achieve, so the gap between the lines is down to the model, not to how old or well used the cars are.
Not enough tests across mileage bands to draw this chart.
What fails
Share of first MOT tests with at least one failure item in each area; 3.0% had a dangerous defect. “vs comparable cars” compares with comparable cars of the same age, mileage and year of first registration.
| Area | MOTs failed on it | vs comparable cars |
|---|---|---|
| Lights & electrics | -5% | |
| Steering | +182% | |
| Tyres & wheels | +6% | |
| Suspension | +49% | |
| Brakes | -52% | |
| Registration plate & VIN | -12% | |
| Engine & leaks | +722% | |
| Exhaust & emissions | -50% |
Most common MOT failures
- 1Headlamp aim too low · Lights & electrics1.7% of MOTs
- 2Reflector missing · Lights & electrics1.4% of MOTs
- 3Tyre tread depth is below minimum requirements of 1.0mm · Tyres & wheels1.4% of MOTs
- 4Steering headbearing excessively stiff or notchy · Steering1.2% of MOTs
- 5Wheel bearing rough when rotated · Suspension0.8% of MOTs
- 6Registration plate does not conform to the specified requirements · Registration plate & VIN0.7% of MOTs
- 7Stop lamp not working · Lights & electrics0.7% of MOTs
- 8Direction indicator not working · Lights & electrics0.5% of MOTs
- 9Brake pad less than 1.0 mm thick · Brakes0.3% of MOTs
- 10Central front steering headbearing excessively stiff or notchy · Steering0.3% of MOTs
Other Royal Alloy models
Older, higher-mileage vehicles pass less often, so each verdict compares a vehicle with others of the same age and mileage. A newer one can pass more often and still rate worse.
| Model | Years | MOTs | Pass first time | vs comparable (1.0 = same) | Verdict |
|---|---|---|---|---|---|
| Royal Alloy GT 125I | 2018–2021 | 4,339 | 85% | 1.24 | Worse |
| Royal Alloy GP 125 | 2018–2023 | 2,180 | 88% | 1.02 | Unclear |
| Royal Alloy GP 300 | 2020–2023 | 1,930 | 92% | 0.68 | Much better |
| Royal Alloy TG | 2020–2023 | 1,634 | 91% | 0.81 | Better |
| Royal Alloy GP 200 | 2018–2021 | 1,012 | 90% | 0.81 | Unclear |
| Royal Alloy GT 125 | 2019–2024 | 436 | 90% | 0.86 | Unclear |